Vibration TransmittersSignal & frequency
Match RMS / Peak, range, passband, axis and update behavior.
ROTATING MACHINERY / PLC & DCS
Vibration transmitters.
Your machine.
Your control system.
4–20mA velocity sensors and industrial vibration monitoring sensors for the motors, pumps and bearings your plant depends on.
Start with a two-wire loop. Scale to triaxial vibration + temperature, wireless monitoring or a local relay alarm.
4–20mAExisting analog inputs
mm/s · in/sSpecify RMS or Peak
01 → 200+Points to plan together
BEARING HOUSING TO PLC
One transmitter. A continuous trend.Review velocity range, detector and connection.
Explore 4–20mA options →
4 mA0 mm/s
12 mA12.5 mm/s
20 mA25 mm/s
Example range: 0–25 mm/s RMS. Colors illustrate configurable status; they are not ISO alarm / trip limits.
MOTORS & PUMPSBLOWERS & COMPRESSORSBEARING HOUSINGSSCREENS & CRUSHERS
FIRST DECISION / CONTROL INTERFACE
Choose the signal.
Then build the installation.
Keep an existing analog input, add digital features or plan a wireless network. The output defines the power, wiring and accessories that follow.
01 / LOOP POWERED
4–20mA velocity vibration transmitters
Two wires. One useful vibration trend.
Review configuration02 / SMART MONITORING
RS485 Modbus & IO-Link vibration sensors
Vibration and temperature, in the same data path.
Review configuration03 / NODE + GATEWAY
Wireless IoT vibration transmitters & gateways
Monitor remote assets without a signal cable.
Review configuration04 / HARSH DUTY REVIEW
Mining screen & harsh-duty vibration sensors
Measure the process motion before judging the machine.
Review configuration05 / ALARM + RELAY
Electronic vibration switches & shutdown monitors
Make alarm behavior part of the specification.
Review configuration4–20mA / ENGINEERING UNITS
A useful trend starts
with the right scale.
Velocity RMS can support overall machinery condition trending. Full-scale range, frequency band and alarm settings are separate choices. Early bearing defects may need higher-frequency features and diagnostic analysis.
Read the ISO & wiring guide →PLC ENGINEERING-UNIT CHECK
4–20mA → mm/s RMS
v = (I − 4) ÷ 16 × full-scale range
Scaling only. Out-of-range / fault currents require model-specific handling; this tool sets no alarm or trip threshold.
EXISTING SENSOR / NEW PROCUREMENT
The suffix matters
as much as the model.
Replacing Metrix, IMI, Wilcoxon, Hansford, IFM, Emerson or Sensonics equipment? Send the complete model and its drawing for a documented interface review.
Fit & connection
Confirm thread, male / female interface, envelope, connector and pinout.
Environment & evidence
Review local temperature, sealing, area certification and calibration scope.
Prepare the documents your purchasing team needs.
Calibration, serial records and receiving checks →Application notes, CAD requests and compliance review →PLANT-WIDE QUOTE / CAD REVIEW
Specify the signal.
Send the complete brief.
Include the machine, original model and control input. Attach a nameplate or asset list and request the drawings and records needed for purchasing.
[email protected]Prefilled email carries your current selections. Add the listed files in your email client.
Plan a pilot and a full-plant rollout.
Ask for sensor-only and installation-kit line items at your exact quantity. Studs, calibration scope, warranty and delivery will appear in the written quote.
Download the asset-list CSVPreview the current email brief
Vibration Transmitters | Plant-wide vibration monitoring RFQ Name: Request profile: Configuration review Request purpose: Configuration advice / project review Band: Confirm band and response tolerance Exact quantity: To confirm Wireless kit: Not selected Documents requested: None Company / plant: Reply email: Series entry: Unspecified Machine: Electric motors, pumps & fans Output: 2-wire 4–20mA velocity [RMS / Peak by configuration] Range: Confirm range / digital features in brief Connector / mounting: Other / confirm with drawing Mounting thread: Confirm thread, gender and depth in brief Connection exit: Confirm from model / clearance drawing Original pinout to review: To confirm from drawing Detector: Confirm per configuration Original model: Not specified Quantity band: 1-5 Accessories: None Source: / Operating speed / RPM: To confirm Ambient / bearing temperature: To confirm PLC / receiving system: To confirm Destination country / site: To confirm Interface and operating requirements: To confirm during configuration review Project brief: Configuration, certification, compatibility, price and delivery subject to written review.